The organic fertilizer grinder is mainly used for urban solid waste composting, rural straw waste, chicken manure, cow manure, sheep manure, pig manure and other special equipment, such as mining, coal mining, metallurgy and other industries. There are many things to pay attention to when using the organic fertilizer grinder. Because of its large demand, the most important thing is to improve the working efficiency of the grinder.
1、 Methods to Improve the Efficiency of Organic Fertilizer Crusher
- The selection of materials is the key. When selecting materials, pay attention to the hardness of materials. The more difficult the material is to crush, the more serious the wear of the equipment. The crushing speed is slow and the natural crushing capacity is small.
- The humidity of the material is the key, that is, when the moisture in the material is large, the material is easy to attach to the content of the grinder, and it is easy to block during the feeding and transportation process, thus reducing the crushing capacity. Therefore, before crushing, the moisture content of the crusher should be reduced as much as possible to facilitate the better work of the crusher.
- After crushing, the finer the material is required, the smaller the crushing capacity.
- Composition of crushed materials. The more fine particles contained in the materials before crushing, the greater the impact on crushing, because these fine powders are easy to adhere and affect transportation. For those with large fine particle content, they shall be screened once in advance.
- Material viscosity: that is, the greater the material viscosity, the easier it is to adhere.
- The better the abrasion resistance of the crushing parts (hammers and plates) of the crushing equipment, the greater the crushing capacity. If they are not abrasion resistant, the crushing capacity will be affected.
2、 Matters needing attention in the use of organic fertilizer crusher
- Before using the crusher, check whether the shape of the machine is damaged due to transportation and whether the random data is complete. Before turning on the power, please ensure that there are iron foreign matters in the cavity to prevent the knife from rotating, and manually rotate the flywheel for many times.
Never move the knife by hand to ensure safety. The motor can be started and put into production to ensure the correct rotation of the pulverizer host. Note: The main machine of the crusher shall not be reversed during operation, otherwise it will cause serious equipment accidents such as fixed knife injury and damage to left and right labyrinths.
2. According to the material characteristics, the normal use time of the organic fertilizer crusher tools has its own length and short time. If there is wear, cut the knife in time. When installing tools, the rotary knife must be fastened. After the fixed knife is slightly fixed, adjust the 4-head knife adjusting screw to ensure that the rotating knife and the fixed knife maintain gaps of 0, 2-0 and 3, then tighten the fixed knife screw and lock the adjusting screw to complete the installation of the tool.
The mill has been running for about 500 hours. Please check the left and right main bearings and clean them if necessary. Add proper amount of grease or replace all grease and organic fertilizer grinding machine equipment to the allowable moisture value of bio fermented organic fertilizer materials of 25-55%. The crushing particle size meets the requirements of 50 mesh granulation.